Park Hot-Melt Coater / Laminator

Ref: BM00570

Age: 1979
Width: 17"
Compact coating & laminating system
Ideal for:
- Lab & plant facilities or narrow web production operations for pressure sensitive laminations
- Multiple webbing arrangements permit coating & laminating as well as open-faced coating or self-wound products such as pressure-sensitive tapes
Substrates: Paper, film, foil & textile fabrics
Park coating system which allows high viscosity coating
Hot melts up to 200,000 CPS (including pressure sensitive & heat-seal label stock, paper, film, foil & textile laminations, direct coated heat sensitive films for tape & flexible packaging structures, moisture/vapor barrier coating packaging overwraps and pressure sensitive tapes)
Rolls: 17" wide
Unwind Positions: 2
Air Shafts: 3”
Manual side shift on both unwinds.
Has upper unwind, lower unwind, centre rewinder, reversing transmission for over or under rewinding
Infeed draw rolls
1 x Rubber-covered nip roll air loaded
1 x Preheat roll
1 x Coating head
1 x Rubber air-loaded backing roll
1 x Rubber-covered laminating roll air loaded
1 x Driven steel combining roll
Driven chill roll: 17" wide & 8" dia

Length: 48"
Depth: 80"
Height: 80"
Coating weight range: 2 - 45 lbs. per 10,000 square feet.
Melt viscosity range: up to 200,000 CPS depending on coating
Design speed: 25-200 FPM.
Main drive speed: 5 HP DC static variable speed drive
Electro Stat: 125 drive, 230 volt, 3 phase, 60 cycle
Unwind & rewind dia: 15"
Coating includes: Melt tank with agitator, 15 gallons

Includes:
1 x Melt tank with agitator, "Y" strainer, metering pump & melt filter
Functions: 17" machine functions by pressure feeding coating material through the slot-orifice applicator die & onto underside of moving web
Metering System: Non-pulsating positive displacement metering system, synchronized with web speed, keeps coating weight constant over entire speed range
Temperature Control: Sterlco hot oil temperature controller up to 700 degrees Fahrenheit hot oil heater Model F6016-BX
1 x Uniflow fiber drum, Model 2 unloader, Industrial Machine Manufacturing Company, Richmond, VA, Model I791-030A, Serial # K8802-4.
Metering unit: Pneumatic disk type drive clutch size 3 heated metering pump.
Filter: Simplex heated melt filter with triple wall stainless steel basket.
Unwinds & rewinds: Cantilever designed.
Coating Technology:
- Because web speed & pump speed are mechanically connected, total coating weight remains constant independent of machine speed changes.
- Capable of coating one side of the web or coat one side and laminate two webs. Preheat roll 5" dia., chill roll 8" dia.
Location: United States.